Hinged Drop Leaf Table Support 10-1/2″

Introduction

This product works in conjunction with a hinge (purchased separately) to hold the table leaf in the horizontal position.

• Spring tension holds the brace open.
• Generally, two supports are recommended per leaf unless the drop leaf is very small.
• The overall length is 10-1/2″.
• The part of the drop leaf or shelf that folds down must be at least 8″.
• At one time, these were available in two sizes, but we can only get the 10.5″ at this time.
• Historically these were used in conjunction with drop leaf table hinges which are no longer available. Back Flap hinges or small butt hinges will suffice.

Gate Hardware