Peakworks Compliance Harness – 1D – Class A – Pass-Thru Buckles

Introduction

• Full body harnesses are designed to arrest a fall while simultaneously distributing the tremendous shock or load to the workers body.
• There are many applications and conditions in which full body harnesses must be worn. In order to maximize effectiveness and minimize injury, it is critical that an appropriate body harness be selected based on the job for which it is intended. PeakWorks offers a full range of body harnesses for almost every application.
• Full body harnesses must be fitted and tightened properly to ensure maximum protection and to minimize injury.
• Waist or restraint belts are not replacements for full body harnesses.
• All PeakWorks full body harnesses are built to meet or exceed the highest standards while providing maximum fit and comfort.
• Full body harnesses come in many styles with a variety of attachment points (D-rings). The placement of these rings is critical to the type of application and positioning of the worker when performing a job.
• The fall protection industry and regulatory committees have standardized the positioning of these attachment rings into Harness Classes A, D, E, L, P.
• Depending on the application, full body harnesses may require more than one attachment class in order to correctly position the body and stress points during a fall, i.e. AE, AL, AP.
• All full body harnesses come with a standard Class A D-ring (located at the back between the shoulder blades).
• Certified to both CSA Z259.10 and ANSI Z359.11 standards
• High visibility colour
• 3 points of adjustment ensuring a good fit (2 leg, 1 chest)
• Pass-Thru chest and leg buckles
• Sub-pelvic strap for added safety and support
• Fall indicator for easier inspection before use
• Large dorsal D-ring for easy connection
• Meets or exceeds all applicable OSHA standards
• Polyester webbing
• 400 lb (180 kg) capacity (combined weight of person, tools, clothing, etc.)

GG-200