2 Gal. 200 psi 12-Volt Fast-Fill Air Source Kit

Introduction

VIAIR Fast-Fill 200 psi Air Source Kits come with a powerful, low amp-draw 380-degreeC VIAIR compressor mounted on a 200 psi-rated 2.0 Gal. air tank with 5 ports. All 200 psi Air Source kits come with a pre-wired 165/200 psi pressure switch. Both kits not only come with the industrys leading 200 psi compressors but also come with a drain cock, safety valve, 1/2 in. port compression fitting for 3/8 in. airline pre-installed. To use, simply connect the pressure switch to fused power, make a solid ground and connect an airline to the compression fitting. A 40 Amp relay and an appropriately-rated fuse are recommended for use with this unit.

• California residents
  see Prop 65 WARNINGS
• Kit comes with a VIAIR 380-degreeC air compressor which has a free flow of 1.34CFM at 0 head pressure and can build 200 psi
• A popular air source kit to power air horns just connects your air horn’s airline to our system, then follow your air horn wiring diagram
• Vehicle’s engine must be running before turning on the compressor
• (Optional) you can also tap into the air tank to use the air source kit as a tire inflator
• Follow the wiring diagram in the instructions or visit our website for the schematic

Features

ARB775W