Commercial Electric B9LT1800SGA2K20 32-Watt 4 ft. Linear T8 5 CCT Selectable (2700K-3000K-3500K-4000K-5000K) Type B Bypass LED Tube Light Bulb – pack of 10

Introduction

Light Bulb Shape Code

T8

Watt Equivalence

32

Manufacturer Warranty

5

Color Temperature

Color Changing Light

Warranty

5

Indoor/Outdoor

Indoor

Pack Size

10

Product Height (in.)

1.11

Light Bulb Base Code

G13

Actual Color Temperature (K)

4000

Light Bulb Features

Ballast Bypass, Enclosed Fixture Rated, Energy Saving, Environmentally-Friendly Design, Low-Heat, Shatter Resistant

Product Width (in.)

1.11

Lumens

1800

Light Bulb Base Type

Bi-Pin

Wattage

14.5

UNSPSC

39101628

Product Overview

Convert your current fluorescent lighting to energy saving LED with 4 ft. T8 32-Watt Fluorescent Replacement Color Changing LED Lamps. The tube is Single-End or Dual-End line voltage powered supply. Simple installation that just remove or bypass the ballast (simple circuit modifications, as shown on instruction). It can be mounted on a traditional T8 T10 T12 tube holder, and is the best alternative to traditional fluorescent tubes. Preset color temperature via the lamp switch or adjust after installing with a standard light switch. Get soft white (2700K), warm white (3000K), bright white (3500K), cool white (4000K) or daylight (5000K) with a flip of an integrated switch. These lamps will replace most fluorescent light tubes with easy installation- ballast bypass rewiring. They produce a similar brightness output of 1800 Lumens while using only 14.5-Watt – up to 45% less than equivalent fluorescent lighting. The Commercial Electric LED tubes are rated to last 50,000-hours / 45.66-years and are RoHS compliant. Make your garage, laundry, or closet spaces look better than ever before with Commercial Electric color-changing tube lamps. It supported single end and double end both. Replace the old lumen depreciated light bulb with the new LED light bulb to maintain full brightness. No UV or IR radiation. Choose a high-quality with high-energy saving LED T8 bulbs for residential or commercial applications.

• T8 ballast bypass type B single or double end powered fluorescent replacement
• Converts your existing fluorescent fixture to LED technology using 4 ft. T8 bulbs
• Need to remove old ballast and rewiring
• Preset color temperature or adjust after install, get soft white warm, bright white, cool or daylight with a flip of a switch (note: not for use with dimmers)
• Energy efficient LED technology uses considerably less power and last longer compared to equivalent standard fluorescent light bulb
• Shatter resistant coating; instant on to full brightness and no flicker or strobing
• Indoor/suitable for damp locations
• Non-dimmable
• Brightness: 1800 Lumens
• Estimated yearly energy cost: $1.74 (based on 3-hours/day, 11c/kWh, cost depend on rates and use)
• Toggle between soft white (2700K), warm white (3000K), bright white (3500K), cool white (4000K) or daylight (5000K) from any standard light switch
• Energy used: 14.5-Watt (equivalent to a 32-Watt standard fluorescent light bulb)
• Energy efficient: up to 45% less energy than standard fluorescent light bulb
• Life: 45.66-years (based on 3-hours per day)
• Life hours: 50,000
• Suitable for enclosed luminaries
• Product base: G13 medium bi-pin base
• UL/CUL Listed, RoHs compliant and 100% mercury free