White Lion 1 3/8″ Dry Core bit Quartzite, Quartz, Granite

Introduction

Weha White Lion 1 3/8″ Dry Diamond Core Bit for Quartzite, Granite,Engineered Stone, Quartz

Weha White Lion 1 3/8″ Dry Diamond Core Bit is an outstanding core bit for quartzite, granite, engineered stone, quartz, and concrete counter top materials.

With a high diamond concentration of diamonds, the Weha White Lion Quartzite Core Bit will equal the same cost per hole as the most expensive core bits on the market.

Featuring vacuum brazed diamonds on the inside and outside of the core, the 1 3/8″White LionDry Core Bit will not only drill fast but will leave the hole very smooth and clean for the faucets to easily slide in to.

Additionally the side diamonds allow the hole to be easily expanded very fast with the vacuum brazed diamonds.

At 3 5/8″ in total length, theWhite LionCore Bits will be perfectly stable for “biting” into the stone and for drilling free hand with the wet or dry grinders. This 3 5/8″ length gives just enough depth to drill through 2cm, 3cm granite and stone without any problems.

The WehaWhite LionDiamond Granite Core Bits was specifically designed for drilling free hand. TheWhite LionDiamond Core Bit has very sharp diamond lines to start the drilling on the stone at an angle without skipping across the stone. The strong solid weldingis also made for the circular motion when drilling in the hole to speed up the coring and drilling process.

Weha really thought through the real world drilling process and produced one of the best quartzite core bits that are also great for granite and engineered stones at one of the best prices one could ask for.

1 3/8″ (35mm) Diameter

5/8-11 thread

3 5/8″ total length

Wet & Dry Use

Max RPM 6500

Recommended RPM: 3800-4800 RPM

Line 40 (Bore 22) / Line 40